Opening And Closing The System - TYAN MicroServer Series User Manual

7.5 Opening and Closing the System

CAUTION:
!
Most repairs to the Tyan MicroServer should only be performed by a professional
service technician. Basic repairs and troubleshooting can be done if authorized in
the product documentation or if directed by telephone or online support from
Tyan. If damage has occurred due to repairs or service that is not approved by
Tyan, the product warranty becomes invalid. Review all safety guidelines that are
provided with the Tyan MicroServer.
CAUTION:
!
The top cover must be installed to maintain proper system cooling.
Prerequisite:
Opening the Top Cover
1. Remove three (3) screws from the top cover. (Figure 5-4)
2. Slide the top cover until clear from the chassis.
3. Lift and remove the top cover.
Top
Cover
Closing the Top Cover
1. Place the top cover over the chassis. (Figure 5-4)
2. Slide the top cover until the bottom edge of the top cover is under the chassis and the top
cover is secure to the chassis.
3. Install and secure the top cover with the three (3) screws.
Power down the system.
Figure 5-4. Opening the Top Cover
http://www.tyan.com