Installing An Pass-Through-M1902F65-Cmmpt System Board - TYAN MicroServer Series User Manual

7.10 Installing an Pass-through-M1902F65-CMMPT System Board

1. Holding the Pass-through-M1902F65-CMMPT system board in a slight angle, align
and insert the system board connectors with the Gigabit LAN port and management
port slots on the front of the Pass-through-M1902F65-CMMPT blade. (Figure 5-6)
2. Lower the system board onto the Pass-through-M1902F65-CMMPT blade.
3. Install and secure the system board to the Pass-through-M1902F65-CMMPT blade with
the five (5) screws.
4. Install the Pass-through-M1902F65-CMMPT module into the chassis. See
Pass-through-M1902F65-CMMPT Module.
http://www.tyan.com
Installing