Table of Contents
Advertisement
7.4 Fan Modules
CAUTION:
!
Most repairs to the Tyan MicroServer should only be performed by a professional
service technician. Basic repairs and troubleshooting can be done if authorized in
the product documentation or if directed by telephone or online support from
Tyan. If damage has occurred due to repairs or service that is not approved by
Tyan, the product warranty becomes invalid. Review all safety guidelines that are
provided with the Tyan MicroServer.
Prerequisite:
7.4.1 Removing a Fan Module
1. Press and hold the release latch on the fan module. (Figure 5-3)
2. Pull the handle on the fan module to remove it from the chassis.
7.4.2 Installing a Fan Module
1. Align the fan module with the chassis. (Figure 5-3)
2. Install the fan module and push until the release latch locks and the fan module is seated
properly with the chassis.
Power down the system.
Handle
Figure 5-3. Removing a Fan Module
http://www.tyan.com
Release
Latch
Advertisement
Table of Contents
