5.1 Utility Screen
Specifying the Input Screen Functions
The following two functions are available on the Input screen (when [Input] is
touched).
(Refer to p. 5-4)
G
The initial mode settings, selected after the copier is reset, can be changed.
(Refer to p. 5-5)
G
User-specified copy modes can be stored as copy programs.
G
Up to 10 specified copy modes can be stored as copy programs. These stored
copy programs can be recalled by touching [Copy Program Recall] on the Utility
screen.
Konica 8020/8031
5
5-3