Changing The Name Of A Handset; Changing A Handset's Internal Number - Siemens Gigaset SX670 isdn User Manual

Gigaset SX670_SX675 isdn / EN-Master / A31008-xxxx-xxxx-x-xxxx / registr_sett.fm / 7.11.07
If the internal party does not answer or
the line is busy, press the display key
to return to the external call.
When transferring a call you can also press
the end call key a before the internal
party answers.
Then, if the internal party does not answer
or the line is busy, the call will automati-
cally return to you (the display will show
Recall).
Internal consultation/conference calls
When you are conducting an external
call, you can call an internal participant at
the same time for consultation or hold a
conference call between all 3 participants.
You are conducting an external call:
u
s
If the internal participant does not answer
or the line is busy, press the display key
to return to the external call.
§End§
If the internal participant answers,
either:
§Options§
End Active Call
or:
§Conference§
Ending a conference call
a
If an internal participant presses the end
call key a, the other handset remains
connected to the external participant.
Open the list of handsets.
The external participant hears
hold music if activated (see
page 65).
Select handset and press
You are connected to the inter-
nal participant.
Press the display key.
Select the menu item and
confirm.
You are reconnected with the
external participant.
Press the display key.
All 3 participants are con-
nected with each other.
Press the end call key.
Accepting/rejecting call waiting
§End§
If you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). The caller's number or
name will appear in the display if Calling
Line Identification is enabled.
Accepting an external waiting call during
an internal call
Press the display key.
§Accept§
You accept the waiting call and the inter-
nal call is put on hold. Both parties are
shown on the display; the current one is
marked.
You can toggle (page 23) or set up a con-
ference call (page 24).
Rejecting the external call
Press the display key.
§Reject§
The call waiting tone is turned off. You
remain connected with the internal party.
The ringer tone can still be heard on other
.
§OK§
registered handsets.

Changing the name of a handset

The names "INT 1", "INT 2" etc. are
assigned automatically at registration.
You can change these names. The name
must be no more than 10 characters. The
changed name is displayed in every hand-
set's list.
u
Open list of handsets. Your
own handset is indicated by <.
s
Select handset.
Press the display key.
§Edit§
~
Enter name.
Press the display key.
§Save§
Changing a handset's internal
number
A handset is automatically assigned the
lowest free number on registration. If all
slots are occupied, number 6 is overwrit-
51