Required Tools, Measurement And Auxiliary Devices - Siemens MOBILETT Plus Maintenance Instructions Manual

8
1.4

Required tools, measurement and auxiliary devices

NOTE
•
Standard service equipment*
•
Digital multimeter
•
kV measurement device (works with the filter comparison method)
or storage oscilloscope with ± 2.5 % accuracy
•
Storage oscilloscope with ± 2.5 % accuracy
•
Protective conductor meter
•
Equivalent leakage current meter
•
Torque wrench 6-12 Nm
•
Torque wrench 20-25 Nm
•
Lux meter (only for USA)
•
Spring scale for 350 N
•
Dose meter (only for USA or if optional 'DAP measuring system' is installed)
•
Cable (min. 4 m long; min. 1000 N tensile strength)*
•
2 pieces of wood, approximately 50 x 75 x 500 mm (2.5 x 3 x 20 inches)*
•
Calibration tool for 'DAP measuring system', part no. 65 84 978
MOBILETT Plus/ -E/ -M
All tools, measurement and auxiliary devices, with the exception of
those marked "* ", are listed in the STC (Service Tools Catalog)
along with their specifications.
SPR8-215.831.04.03.02
07.05
Page 8 of 64
CS PS 24
General
Siemens AG
Medical Solutions