Direct Playback; Adjusting The Brightness Of The Display (Front Panel Only) - Pioneer VSA-E07 Operating Instruction

Direct playback

Amplifier
DSP STEREO
/ dts
ADVANCED
THX
STANDARD
THEATER
MIDNIGHT DIRECT
DIGITAL
LOUDNESS
NR
DIRECT
DIRECT

Adjusting the brightness of the display (front panel only)

Use the FL DIMMER button to adjust the brightness of the fluorescent display (FL=fluorescent display).
MAIN SUB
EFFECT
MPEG
SIGNAL
SELECT
FL DIMMER
Press the DIRECT button on the remote
control's Amplifier MAIN screen or on the
front panel.
This mode will give you the most accurate reproduction of
two channels sources.
SIGNAL
SELECT
ANALOG SP A
None of the tone controls or other sound modes
can be used.
Press the FL DIMMER button.
Four levels of brightness ranging from very dim to very
bright can be selected. Each press changes the brightness
of the display. When rotating through the options, the
default brightness can also be selected.
Please note: it is a feature of this unit that the
fluorescent display will be brighter for a few
seconds after you choose a function (like DVD/LD,
CD, etc.) and then get softer. This will still happen
when you adjust the brightness but the new
setting will be the one the display softens to.
Basic Playback
STEREO
VOLUME
dB
49
En