Basic Amplifier Lcd Screens - Pioneer VSA-E07 Operating Instruction

Audio/video multi-channel amplifier
Hide thumbs Also See for VSA-E07:
Table of Contents

Advertisement

Basic Amplifier LCD Screens

Amplifier MAIN Screen
1 Amplifier SUB button
Press this button to select the amplifier sub
screen (on the page 22) when the remote control
is on the amplifier main screen.
2 EFFECT +/– button
Use these buttons to increase or decrease the
amount of effect applied in a DSP or Advanced
Theater mode. When the amount of effect is
increased in a DSP/Advanced Theater mode the
characteristics of that mode become stronger and
more noticeable. The scale ranges from 10-90
with 70 as the default setting. First turn on the
DSP/Advanced Theater mode you want (by
pressing the DSP/Advanced Theater button until
you get the mode) and then increase or decrease
the amount of effect.
2
3
/dts buttons (See p.40,42 & 68-70)
Press these buttons to put the amplifier in the
selected surround sound mode.
4 SIGNAL SELECT button (See p.45)
Press SIGNAL SELECT repeatedly to select one
of the following:
ANALOG : To select an analog signal.
DIGITAL : To select a digital signal.
AC-3 RF : To select an AC-3 RF signal.
AUTO : This is the default. If there are both
analog and digital input signal, the amplifier
automatically selects digital.
Amplifier
MAIN
0
9
DSP
STEREO
/ dts
ADVANCED
THX
STANDARD
THEATER
MPEG
MIDNIGHT
DIRECT
8
DIGITAL
LOUDNESS
NR
6
5
7
5 DIRECT button
6 LOUDNESS button (See p.48)
7 DIGITAL NR button (See p.46)
8 MIDNIGHT button (See p.47)
9 DSP button (See p.41-42)
0 STEREO button (See p.41-42)
Displays and Controls
1
2
SUB
EFFECT
3
SIGNAL
SELECT
4
Switches DIRECT playback on or off. Use to
bypass the tone controls and channel level for the
most accurate reproduction of a program source.
It will automatically put the amplifier in STEREO
mode for the function being used for DIRECT
playback.
Switches the LOUDNESS mode on or off.
Switches the DIGITAL NR on or off (STEREO
mode only).
Switches the MIDNIGHT listening mode on or
off.
Press repeatedly to select a DSP sound mode.
Press to select the STEREO sound mode. In this
mode, sound comes from the front (left and right)
speakers only.
21
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents