Listening In Loudness Mode; Adjusting Bass And Treble (Tone Control) - Pioneer VSA-E07 Operating Instruction

Basic Playback

Listening in LOUDNESS mode

The LOUDNESS mode allows you to boost the bass in a signal. It is useful for listening to music at low volumes.
Amplifier
DSP
/ dts
ADVANCED
THX
THEATER
MIDNIGHT DIRECT
DIGITAL
LOUDNESS
NR
LOUDNESS
LOUDNESS

Adjusting bass and treble (tone control)

Use the BASS (+/–) or TREBLE (+/–) buttons to adjust the low and high frequencies (the amplifier must be in
STEREO mode).
BASS +/–
Amplifier
TAPE 2
EXTERNAL
MONITOR
5.1CH
INPUT
ATT.
BASS +/–
TREBLE +/–
48
En
MAIN SUB
STEREO
EFFECT
STANDARD
MPEG
SIGNAL
SELECT
TREBLE +/–
MAIN SUB
BASS TREBLE
CH SYSTEM
LEVEL
SETUP
Press the LOUDNESS button on the remote
control's Amplifier MAIN screen or on the
front panel.
Each press switches LOUDNESS mode on or off.
SIGNAL LOUDNESS
SELECT
ANALOG SP A
You can't use the LOUDNESS mode with the
THX, DIRECT or EXTERNAL DECODER modes.
Press the BASS (+/–) buttons on the remote
control's Amplifier SUB screen or on the front
panel to adjust the low frequencies.
SIGNAL
SELECT
ANALOG SP A
Press the TREBLE (+/–) buttons on the remote
control's Amplifier SUB screen or on the front
panel to adjust the high frequencies.
SIGNAL
SELECT
ANALOG SP A
• The tone control can be adjusted in a range of
±6 dB.
• The tone control cannot be adjusted in
STANDARD, ADVANCED THEATER modes as
well as DSP, THX, EXTERNAL DECODER,
DIRECT, and 96kHz settings.
STEREO
VOLUME
dB
STEREO
VOLUME
dB
STEREO
VOLUME
dB