Pioneer VSA-E07 Operating Instruction page 25

5
LCD Commander
AMP
TOUCH PANEL
ADJUSTMENT
DVD/LD
LCD CONTRAST
TV/SAT
LCD TIMER :
VCR1
VCR2
5
6
EXIT
REMOTE
SETUP
BEEP ON
MD/TAPE1
CD
10
LINE/
SEC
TUNER
TV
CONTROL
6
Decide which other adjustments you'd like
to make and press those buttons. The
different possibilities are:
BEEP ON : When you have sent a command (pushed
a button) the remote control will beep once if the
command is completed or beep twice if the command
is not possible. You can turn this function ON or OFF
by pushing this button (the default setting is ON).
LCD CONTRAST : You can lighten or darken the
contrast on the remote control screen. Use the – /+
buttons to change the contrast.
LCD TIMER : In order to save the battery a timer will
automatically turn the remote control off after a set
amount of time if no commands are entered. You can
choose how long the idle remote control will stay on
before the timer turns it off. You can set this function
in a range of 10-60 seconds. The default setting is 10
seconds. Use the – /+ buttons to adjust the number of
seconds for the timer setting.
(SYSTEM SETUP screens and REMOTE SETUP
screens, as well as the screens within those
operations, are all fixed to stay on 60 seconds. If no
command is entered they will turn off after 60
seconds.)
When finished with adjustments press the
EXIT button repeatedly to go back to the
Amplifier screen.
You can press the EXIT button anytime to go back
a screen or repeatedly to escape this set up
mode.
Initial Set Up
25
En