Table of Contents
Advertisement
Remote Control of Other Components
Tuner operations
• The following operations are available from the amplifier's remote control after you program
your FM/AM tuner into it, but some operations may need to be learned separately by the
amplifier (see "Setting Up the Remote Control to Control Other Components," p.50-53).
• To perform these operations, press the LINE/TUNER button to set the remote to the tuner operation
mode.
Tuner
+
–
STATION
5
+
–
4
TUNING
3
MPX
BAND
CLASS
2
DISP
DIRECT
MODE
ACCESS
1
0
9
8
60
En
1
2
3
6
5
4
6
7
8
9
RF
7
0
L1
ATT
-
1
Press to switch the TUNER on or off.
2 BAND
Switches between AM and FM radio bands.
3 MPX
Press to switch between auto stereo and mono
reception of FM broadcasts. When the broadcast
signal is weak, selecting mono will improve the
sound quality.
4 TUNING –/+
Use to manually tune to radio stations.
5 STATION –/+
Use to choose programmed radio stations.
6 Number buttons
Use to input stations and frequency.
7 L1
Use to program selections (not possible with all
models).
8 DIRECT ACCESS
Allows you to input a frequency directly.
9 CLASS
Use to select the class (A, B or C) that a preset
station is in.
0 DISP MODE
Use this to switch between display modes.
- RF ATT
Press to turn the RF attenuator on when receiving
strong FM signals (nearby stations) to reduce sound
distortion.
Hide quick links:
Advertisement
Table of Contents
