Table of Contents
Advertisement
OPERATIONS
The illustration shows model A-402.
BEFORE BEGINNING OPERATIONS
1. Set POWER switch to ON.
2. Set the SPEAKERS switch to A, B, or A + B.
3. Set DIRECT switch and MUTING
switch to OFF
(A-402 only).
PLAYBACK PROCEDURES
1. Set
INPUT
SELECTOR
switch
to the
desired
playback source.
¢ For playback with the equipment connected to LINE terminals:
Set to [LINE].
¢ For reception of an AM/FM
broadcast: Set to [TUNER].
For playback of a record: Set to [PHONO].
For playback of a compact disc: Set to [CD].
e For playback of a tape: Set to [TAPE 1/DAT] or [TAPE 2].
2. Operate the equipment to begin playback.
3. Adjust playback volume with VOLUME control on
this unit.
RECORDING TAPES
1
#83
1. Select
the
recording
equipment
with
REC
SELECTOR switch.
@ When set to SOURCE, the signals from the device connected to
the terminals of the selected input are recorded. (To record
signals from the device connected to PHONO or LINE terminals,
for instance set REC SELECTOR
switch to SOURCE
and set
INPUT SELECTOR switch to PHONO or LINE accordingly.)
¢ Recording is impossible when the switch is set to OFF.
eWhen REC SELECTOR switch is set to a position other than
SOURCE
or OFF, the equipment selected by REC SELECTOR
switch can be recorded from, irrespective of the settings of
INPUT SELECTOR or DIRECT switches.
2. Begin
recording
by
operating
the
recording
equipment.
Refer to the operating instructions of your cassette deck for
proper operating procedures.
MONITOR WHILE OPERATING
On a 3-head cassette deck, sound can be concurrently heard while
recording on tape. This operation of checking the sound quality and
recording
level
is called
"monitoring".
For
monitoring,
INPUT
SELECTOR switch of this unit must be set to the cassette deck on
which recording is being done.
e When recording with the cassette deck connected to TAPE 1/DAT
terminals: Set to TAPE 1/DAT.
®When
recording with the cassette
deck connected
to TAPE
2
terminals: Set to TAPE 2.
NOTE:
When recording from PHONO or LINE source, recording monitor is
not possible.
8
<ARB1433>
ae
00.0
INPUT SELECTOR
Advertisement
Table of Contents
