Table of Contents
Advertisement
Displays and Controls
Amplifier SUB Screen
1 Amplifier MAIN button
Press this button to select the amplifier main
screen (on the page 21) when the remote control
is on the amplifier sub screen.
2 BASS & TREBLE (+/–) buttons (See
p.48)
Use to adjust the high and low frequencies
(STEREO mode only).
3 SYSTEM SET UP button
Use to set up the speaker and sound systems.
For more information see "Setting Up for
Surround Sound " starting on p. 26.
4 CHANNEL LEVEL button (See p.31-32)
Use this feature to adjust the level of individual
speakers during playback of a source.
22
En
Amplifier
MAIN
7
TAPE 2
EXTERNAL
MONITOR
5.1CH
6
BASS
5
INPUT
ATT.
CH
LEVEL
4
5 INPUT ATT button
6 EXTERNAL 5.1 CHANNEL button (See
7 TAPE 2 MONITOR button (See p.62)
1
2
SUB
TREBLE
SYSTEM
SETUP
3
Use to lower the input level of an analog signal
that is too powerful, thus causing the amplifier to
distort (the overload indicator will light furiously).
p.47)
Use to hook up an external component that can
decode other types of signals and input them into
the VSA-E07.
Selects the tape deck (or MD recorder, etc.)
connected to the TAPE 2 MONITOR inputs/
outputs. Allows monitoring of a recording as it's
being made.
Hide quick links:
Advertisement
Table of Contents
