Display - Pioneer VSA-E07 Operating Instruction

Displays and Controls

Display

All the display information is explained and /or referenced here.
1 2 3
SIGNAL ATT
SELECT OVER
ANALOG SP
DIGITAL
AC-3RF
AUTO
AC-3DTS MPEG
L C R
LS LS RS
@
1 SIGNAL SELECT indicators
Light to indicate the type of input signal selected
for the current component (see "Front Panel", %,
SIGNAL SELECT).
ANALOG : Lights when analog signals are
assigned.
DIGITAL : Lights when digital audio signals are
selected.
AC-3 RF : Lights when AC-3 RF signals are
assigned.
AUTO : Lights when the receiver is set to select
the input signal automatically.
AC-3 : Lights when a source with Dolby Digital
signals is played.
DTS : Lights when a source with DTS audio
signals is played.
MPEG: Blinks when the MPEG mode is selected,
and lights when a source with MPEG audio
signals is played.
2 Speaker indicators
Light to indicate the current speaker system (see
"Front Panel", _, SPEAKERS (A/B)).
SP # A : Lights when speaker system A is
selected.
SP # B : Lights when speaker system B is
selected.
SP # AB : Lights when speaker systems A & B
are selected.
18
En
4 5 6 7 8
LOUDNESS MIDNIGHT DSP
H.P
AB
LFE
!
9 0
STEREO
PRO LOGIC
DIGITAL
MPEG
~
3 Analog level indicators
OVER : If "ANALOG" is selected in SIGNAL
SELECT, this indicator lights to show that an
excessively strong signal is being processed.
When this occurs, press INPUT ATT on the front
panel to attenuate (lower) the signal. Also, when
"DIGITAL" is selected in SIGNAL SELECT, this
indicator lights to show that a source containing
an excessive amount of information is being
processed. If this occurs, see p. 42.
ATT : Lights when INPUT ATT is used to reduce
the level of the input signal (available in ANALOG
mode only).
4 LOUDNESS indicator (See p.48)
Lights when the LOUDNESS mode is on.
5 H.P (headphones)
Lights when headphones are connected to the
PHONES jack (speakers A and B turn off
automatically).
6 MIDNIGHT indicator (See p.47)
Lights when the MIDNIGHT listening mode is on.
7 DSP indicator (See p.41-42)
Light when a DSP or Advanced Theater mode is
selected.
8 STEREO indicator (See p.41-42)
Lights when a STEREO mode is selected.
- =
VOLUME
dB
TAPE 2