Vcr Operations - Pioneer VSA-E07 Operating Instruction

Remote Control of Other Components
The following operations are available from the amplifier's remote control after you program your
satellite tuner/VCR deck/Cassette deck into it, but some operations may need to be learned separately
by the amplifer (see "Setting Up the Remote Control to Control Other Components," p. 50-53).
STB (satellite tuner) operations
• To perform these operations, press the TV/SAT button to set the remote to the SAT operation mode.
• For more information on individual commands consult the manual that came with the component.
• When presetting a satellite tuner other than one made by PIONEER, screen1 will appear.
• When presetting a PIONEER satellite tuner, screen 2 will appear.
Satellite Tuner screen 1
STB (SAT)
6
MENU GUIDE
5
CH CH
4
3
ON/OFF EXIT
2
L1
1
1
Press to switch the satellite tuner on or off.
2 EXIT
Press to exit the current setting of the SAT.
3 OFF/ON
Press to switch the satellite tuner off.
4 CH –/+
Use to chnage channels on the satellite tuner.
5 GUIDE
Use to turn the program information screen on or
off.
6 MENU
Use to turn the main menu on or off.
7 Number buttons
Use to select satellite channels.
8 L1-3
Freely assignable keys where you can enter any
command you like-refer to p. 52-53 for more on this.

VCR operations

• To perform these operations, press the VCR 1 or VCR 2 button to set the remote to the VCR
operation mode.
• For more information on individual commands consult the manual that came with the component.
6 7
VCR
5
4
REC
3
TV/
CH CH
VCR
2
L1 L2
1 0
58
En
1 2 3
7
4 5 6
7
8 9
L2 0 L3
8
1 2 3
8
4 5 6
7 8 9
9
L3 11 L4
Satellite Tuner screen 2
STB (SAT)
4
3 MENU GUIDE
A B C
2
D E
1
EXIT
7
1
Press to switch the satellite tuner on or off.
2 A/B/C/D/E
Use to make selections from the SAT menu.
3 MENU
Use to turn the main menu on or off.
4 GUIDE
Use to turn the program information screen on or
off.
5 Number buttons
Use to select satellite channels.
6 L1-2
Freely assignable keys where you can enter any
command you like-refer to p. 52-53 for more on this.
7 EXIT
Press to exit the current setting of the SAT.
1
Press to switch the VCR on or off.
2 CH –/+
Use to change channels on the VCR's tuner.
3 1¥¡
1 : Press to rewind the tape.
¡ : Press to fast foward the tape.
4 REC ¶
Press to start recording.
1 2 3
5
4 5 6
7
8 9
L1 0 L2
6