Remote Control Of Other Components; Setting Up The Remote Control To Control Other Components - Pioneer VSA-E07 Operating Instruction

Remote Control of Other Components

Setting Up the Remote Control to Control Other
Components
In addition to controlling the amplifier, the supplied remote control can operate your other components (VCR, TV,
LD, CD, etc.) after you program it to do so. In this way, instead of fumbling with many different controls and
buttons, you only need to use one remote control. If your component(s) are listed in the remote control's
memory, simply follow the steps below. If your component(s) are not listed, or if you want the remote to learn
additional operations, you can use the learning mode to input the information from the remote controls supplied
with your other components.
Recalling settings stored in the remote control
The following steps show you how to recall the setting stored in the remote control. Once a setting is recalled
and the component assigned, you can use this remote to easily operate the component.
• You can press the EXIT button at any time to go back a screen.
• See "Using Remote Control with Other Components" on pages 55 through 61 to operate your other
components.
• See "Preset Code List" on p. 71-74 for the components and manufactures available.
AMP
DVD/LD
TV/SAT
VCR1
VCR2
MULTI
OPERATION
STANDBY/ON
ENTER
3
1
Remote Setup
AMP
LCD
COMMANDER
DVD/LD
PRESET RECALL
TV/SAT
LEARNING
VCR1
VCR2
Preset Recall
AMP
The On Screen Preset Guide
DVD/LD
will help you to find out the
preset ID for your equipment.
The Guide will be available on
TV/SAT
the screen of TV connected
to the Amplifier.
VCR1
Please operate according to
the Guide with the cursor
keys on this remote.
VCR2
4
50
En
2
1
on off
BACK LIGHT
TV
CONTROL
REMOTE
SETUP
2
FUNCTION
MD/TAPE1
+
CH
–
CD CH
+
VOL
LINE/
TUNER
–
VOL
TV
CONTROL FUNCTION
3
MASTER VOLUME
+
SYSTEM
OFF MUTING
4
–
EXIT
REMOTE
SETUP
MULTI OPERATION
MD/TAPE1
DIRECT FUNCTION
CD
LINE
TUNER
TV
CONTROL
EXIT
REMOTE
SETUP
MD/TAPE1
CD
LINE/
TUNER
TV
CONTROL
Turn on your TV and the amplifier.
Make sure your TV is set to the appropriate video
input (e.g. VIDEO 1).
Press the REMOTE SETUP button.
The REMOTE SETUP menu appears on the remote
control's screen.
Press the PRESET RECALL button on the
LCD screen.
Choose the button you want to assign to
control the component you want to
operate.
Naturally it's easiest and most logical to assign the
button that has the same name as the component you
are setting up (for example, choose the CD button for
your CD player).
In some cases, however, you may need to assign a
button to a component with a different name.
For example, on button is marked MD/TAPE 1. If you
assign this button to your MD player you'll need to
use a different button, like VCR 2, for your tape deck.
The first manufacturer (and preset code(s)) appear on
your TV screen
Preset Recall
1Select function
2Select products [5∞23]
3Input ID CODE
2 [TAPE ] 3
5 [AKAI
[ 823
[
EXIT=Remote setup
Page 1/22
] ∞
]
]