System Off - Pioneer VSA-E07 Operating Instruction

System OFF

The SYSTEM OFF feature allows you to tell the amplifier and your other components to stop and turn off with
the push of only one button on the LCD commander. For example, you can program the unit to stop your DVD,
turn off your TV, turn off your DVD player and turn off the amplifer itself. You don't need to program in other the
power for PIONEER components, they will go off automatically in this mode. The amplifier itself will go off
automatically as well.
The steps below show you how to program a string of up to 5 different SYSTEM OFF operations based on eight
possible components.
Be sure to recall or learn the remote commands for each component before programming the SYSTEM
OFF function (see "Setting Up the Remote Control to Control Other Components", p. 50-53).
Remote Setup
AMP
LCD
MULTI OPERATION
COMMANDER
DVD/LD
DIRECT FUNCTION
PRESET RECALL
TV/SAT
LEARNING
VCR1
VCR2
3 Multi Operation
AMP
DVD/LD
TV/SAT
SELECT FUNCTION
VCR1
VCR2
System OFF
AMP
SELECT NUMBER
DVD/LD
4
1 2
TV/SAT
VCR1
4
VCR2
System OFF
AMP
5
SELECT FUNCTION
DVD/LD
1 2
TV/SAT
VCR1
4
VCR2
1
1 2
2
EXIT
REMOTE
SETUP
MD/TAPE1
3
CD
LINE
TUNER
TV
CONTROL
4
EXIT
REMOTE
SETUP
MD/TAPE1
CD
LINE
TUNER
TV
CONTROL
EXIT 5
REMOTE
SETUP
MD/TAPE1
3
CD
LINE/
5 TUNER
TV
CLEAR
CONTROL
EXIT
REMOTE
SETUP
MD/TAPE1
3
CD
LINE/
5
TUNER
TV
CLEAR CONTROL
Using Other Functions
Press the REMOTE SETUP button.
Press the MULTI OPERATION button.
To cancel MULTI OPERATION
Press the EXIT button again.
The next screen will instruct you to SELECT
FUNCTION. Press the AMP button.
To go back to the REMOTE SETUP screen
Press the EXIT button.
Next you should select the command
number you want the process to start with.
Of course it's logical to start with 1 so press
command 1 button (the box the 1 with
inside it).
This tells the amplifier this will be the first command.
The number will become shaded.
To go back one step
Press the EXIT button.
To go back to the REMOTE SETUP screen
Press the EXIT button repeatedly.
Select the FUNCTION button of the
component which you want to stop or turn
off (for example, stop your DVD player) and
press that FUNCTION button on the remote
control.
The screen for that component will appear in the LCD
display.
To go back one step
Press the EXIT button.
To go back to the REMOTE SETUP screen
Press the EXIT button repeatedly.
65
En