Pioneer VSA-E07 Operating Instruction page 19

9 Function indicator
Displays the function.
2
0
Surround/dts mode indicators
2
DIGITAL : When the
on the amplifier is on, this indicator lights to
indicate playback of a Dolby Digital signal.
2
However, PRO LOGIC lights during 2 channel
playback of Dolby Digital.
2
PRO LOGIC : When the
mode on the amplifier is on, this indicator lights
during 2 channel playback. ( Both B or A+B
speaker systems turn off automatically when
headphones are plugged.)
dts : Lights when DTS signals are input.
THX: Lights when the HOME THX CINEMA
mode is selected.
MPEG: Lights when the MPEG mode is selected.
- MASTER VOLUME indication
Displays current level of master volume.
= TAPE 2 indicator
Lights when the TAPE 2 monitor is on.
~ Character display
Displays sound modes, general information, etc.
! LFE indicator
LFE (Low Frequency Effects) indicator lights to
indicate that the program source contains an LFE
channel. The indicator under the LFE lights during
actual playback of the LFE signals (LFE signals
are not present in all parts of the soundtrack).
@ Program Format indicator
When a Dolby Digital or DTS signal is input, the
following indicators light to show the channels
being played back.
1 2
L : Left front* * , C : Center*
1
LS : Left surround* , S : Surround (mono)*
1
RS : Right surround*
*1: Indicates 5.1ch Dolby Digital or DTS playback.
*2: Indicates Dolby surround playback.
2
Surround/dts mode
2
Surround/dts
1 1 2
, R : Right front* * ,
2
,
Displays and Controls
19
En