Table of Contents
Advertisement
Beam
On the Home screen, press the Start soft key, and select Settings
setting items.
The Beam setting allows you to receive data from another device using infrared. Select Receive
incoming beams before receiving data.
Phone
On the Home screen, press the Start soft key, and select Settings
setting items.
Phone settings are primarily used to set options for calls you receive, such as Caller ID, Call
Waiting, and Call Forwarding. These settings are related to the services you applied with your
service provider.
Phone setting item
Call Barring
Call Forwarding
Call Options
Call Waiting
Caller ID
Channels
Fixed Dialing
Networks
N O T E
You need to enter the PIN2 code to set the fixed dialing settings. Afterwards, the PIN2 access
has been granted. To avoid unauthorized access to the settings, turn off your Smartphone and
then turn it on again, or turn off the radio and then turn it on again (see section 3.10).
Function
Enables you to block incoming and/or outgoing calls.
Enables you to forward all or selected calls to another number.
Enables you to change phone numbers, such as your voice mail
and SMS service center, answer incoming calls by pressing any
key, and other advanced call options.
Enables you to turn Call Waiting on or off.
Enables you to let your identification be known to all callers,
only your contacts, or no callers.
Enables you to configure cell broadcast. The cell broadcast is an
add-on service provided by your service provider, which allows
you to receive a variety of information such as weather forecast,
stock, and traffic.
Enables you to limit your calling area to one or more specific
phone numbers and/or area codes.
Identifies your current network and changes your network
selection from Automatic to Manual.
Beam to access the Beam
Phone to access the Phone
55
Advertisement
Table of Contents
