Phonecamera Settings - Mio Digi Walker 8390 User Manual

PhoneCamera Settings

To configure PhoneCamera, on the PhoneCamera main screen, press the Menu soft key and select
Settings.
PhoneCamera
setting
Timer
Mode
Picture Resolution
Video Quality
Storage Media
Brightness
Flicker Control
Continues Interval
Description
Sets the time lag between releasing the shutter and shooting the photo.
This is helpful for avoiding blurring caused by vibration of your
Smartphone when you press a key. Press the Left/Right key to select an
option in the range of 0~10 seconds (default is 0). For example, if you
set the timer to 3, when you press the key to shoot, the timer will start to
count down and you should keep the Smartphone steady until the time is
up and the photo is shot.
Selects the Normal Mode or Twilight Mode.
Sets the resolution (pixels) of the image.
Press the Left/Right key to select. The options are 176x144 (default),
320x240 and 640x480.
The image resolution for videos is 176x144.
Sets the video quality to High Quality or Normal Quality.
Selects the storage location for the photos and videos.
Press the Left/Right key to select Storage (Smartphone's memory) or
SDMMC Disk (if a storage card is inserted).
Note: If you want to save the files in a storage card, the card must be
inserted first and the option set as SDMMC Disk.
Adjusts the brightness of the image.
Press the Left/Right key to select Manual (default) or Auto.
When you use the camera indoors, you can select 50Hz or 60Hz to
match the flicker frequency of the fluorescent lamp.
Sets the time interval (second) for taking continuous photos.
Press the Left/Right key to select 0.5s, 0.75s and 1s.
121