Mio Digi Walker 8390 User Manual page 124

7.
Connect your Smartphone to the desktop computer, and insert the Companion CD into the
CD-ROM drive of the desktop computer.
8.
The installation of the USB driver will start automatically. If needed, browse for the USB
driver on the Companion CD.
9.
Open the Device Manager on the desktop computer by clicking Start
System Hardware (for Windows 2000/XP/2003)
10.
Open the Modem item, right-click on Mio DigiWalker SmartPhone USB Modem, and
select Properties.
11.
Open the Advanced page, enter +CGDCONT=1,"IP","MMS" under Extra initialization
commands, and click OK.
N O T E
Depending on your service provider, the string for you to enter may not be "MMS." To make sure
of the correct string to enter, on the Home screen press the Start soft key
Connections
your GPRS connection
12.
On your desktop computer, create a dial-up connection using your Smartphone as the modem,
enter *99# for the phone number and user name; you do not need to set up the password.
N O T E
For information on creating a dial-up connection on the desktop computer, see the documents
that came with the operating system.
You are advised to set the baud rate to at least 115200.
13.
Click Dial on your dial-up connection screen. The
successful dial-up connection.
14.
To end the connection, right-click on the
Disconnect. Or, press the right soft key on the Smartphone
N O T E
Failing to deactivate the modem link when you are finished using it might result in problems with
using ActiveSync in the same session.
Disconnecting the ActiveSync cable will not completely stop the modem connection on the
Smartphone. You have to press the Menu soft key and select Deactivate.
110
the Menu soft key Edit Connections
the Menu soft key
Device Manager.
GPRS Connections
Edit Access point.
icon appears on the task bar after the
icon on the desktop computer and select
Deactivate.
Control Panel
Settings Data
select