Photoid Overview - Mio Digi Walker 8390 User Manual

Table of Contents

Advertisement

11.1

PhotoID Overview

The PhotoID program allows you to select a photo for a contact so that you can easily identify the
caller by the photo shown on the screen. In addition, the PhotoID program is also a convenient tool
for managing the phone book stored in Contacts of the Smartphone and in your SIM card. You can
add, delete or edit a phone number, and make a call from here.
On the Home screen, press the Start soft key and select PhotoID to open PhotoID. By default, the
program will load the phone book of the SIM card and the Smartphone's Contacts. After the
loading finishes, the contact list (PhotoID main screen) is displayed in the alphabetic order of
contact names.
N O T E
On your Smartphone, there can be two kinds of independent contact lists. One is stored in the
Smartphone's memory by Microsoft Contacts; the other is stored in the SIM card.
You can use both Contacts and PhotoID to load the contact information stored in the
Smartphone's memory and SIM card. You can use either program to add or delete data; the
changes you make will be valid in both programs.
For information on using Contacts, see section 6.1.
To refresh the contact data, press the Menu soft key on the PhotoID main screen and select
Refresh.
If a contact chooses not to display his mobile phone number, then your setting for this contact in
PhotoID will not be enabled.
142

Advertisement

Table of Contents
loading

Table of Contents