Charging The Battery - Mio Digi Walker 8390 User Manual

1.4

Charging the Battery

You must fully charge the battery before starting to use your Smartphone for the first time.
1.
Attach the converter to the AC adapter.
2.
If you have the cradle, you can place the Smartphone on the cradle to charge the battery.
Not using the cradle
Connect the DC end of the AC adapter
to the power connector on the bottom of
the Smartphone, and the other end to the
electrical outlet on the wall.
3.
The notification indicator on the Smartphone's top cover glows in red to indicate that battery
charging is in progress. Do not disconnect the AC adapter until the battery is fully charged.
The indicator will change to green when the battery is fully charged.
N O T E
When charging the battery for the very first time, you should charge it for at least eight hours.
A discharged battery can be fully charged after two hours. The charging time may vary in
different conditions.
When a fully discharged battery is being charged, you can turn on the Smartphone only after it
connects to the AC power for at least five minutes.
You can use your Smartphone during charging.
If your cradle has a battery connector, you can charge the battery removed from the
Smartphone.
Converter
Using the cradle
Slide the Smartphone into the cradle.
Connect the DC end of the AC adapter to
the power connector on the rear of the
cradle, and the other end to the electrical
outlet on the wall.
Converter
9