Frequently-Asked Questions - Mio Digi Walker 8390 User Manual

Table of Contents

Advertisement

14.2

Frequently-asked Questions

Problem
Power doesn't turn on.
Cannot make a call.
No ring tone
Poor signal quality
Memory Problems
Solution
The remaining battery power may be too low to start up your
Smartphone.
If you use the external AC power, make sure that the AC
adapter is firmly and correctly connected.
Remove the battery and replace it. Then turn on the
Smartphone again.
Make sure that the phone function is turned on.
Make sure that you are within the range of the mobile phone
network service.
Make sure that the keypad lock is disabled.
Make sure that you dial the correct number.
Check the sound volume.
Make sure that your Smartphone is not muted.
If you are inside a building, move near a window or go
outside.
If you are in a reinforced structure, such as an elevator or
parking garage, wait until you are outside to try your call.
If a warning message of insufficient memory appears, try to
remove programs you no longer need.
If the running programs are occupying large memory, reset
the Smartphone or stop the other programs using
TaskManager. (See section 12.2.)
175

Advertisement

Table of Contents
loading

Table of Contents