Output applications
9.4.1
Punching file holes in copies
Copies will be punched in this mode. Follow the procedure below to select
2- or 4-hole punch and punch position.
!
Detail
For detailed specifications, see "Paper tray/ exit tray capacity" on
page 3-6 and "Folding unit FD-501" on page 25-8.
1
Position the original.
2
Touch [Punch] on the Copy screen.
–
Punched sheets will be delivered to the primary (main) tray. The
Output Application icon shows the number of punch holes and
punch position currently selected.
If you want to change the number of punch holes and punch
position, proceed to the following steps.
3
Touch [Output Appli.] on the Copy screen.
The Output Application screen will be displayed.
bizhub PRO C6500 / bizhub PRO C6500e
9
9-19