Copying Non-Standard Size Original: Custom - Konica Minolta BIZHUB PRO C6500E User Manual

Basic job settings
6.1.7

Copying non-standard size original: Custom

The machine usually detects the standard size of the original fed through
ADF or positioned on the original glass (Standard mode).
Use the Custom mode to specify the desired standard size as scanning area
irrespective of actual size of the original.
This function also allows you to specify/register the desired special size in
1 mm increments, and to recall the registered size when needed.
0 Use [Full Area] on the Custom Size menu for small original that cannot be
detected in Standard mode.
0 Special sizes can be registered in this mode. Registered size information
can be utilized later for both the original and copy paper size setting.
1
Position the original.
2
Touch [Original Setting] on the Copy screen.
The Original Setting screen will be displayed.
3
Touch [Custom].
The Custom Size screen will be displayed.
bizhub PRO C6500 / bizhub PRO C6500e
6
6-15