Konica Minolta BIZHUB PRO C6500E User Manual page 685

Utility screen outlines
Setting Item/Description
bizhub PRO C6500 / bizhub PRO C6500e
02 Multi Folder (Punch) Adj.
Adjust the settings related to the punch function
of the folding unit FD-501.
• Paper Width Adjustment: -20 to +20 (1 step =
0.1mm)
• Hole-Punch Vertical Pos.:
2-Hole Punch -40 to +40 (1 step = 0.1mm)
4-Hole Punch -40 to +40 (1 step = 0.1mm)
03 Multi Folder (Fold) Adj.
Adjust the settings related to the folding function
of the folding unit FD-501.
• Half Fold Position Adj.: -50 to +50 (1 step =
0.1mm)
• Tri-Fold-in Pos. Adj.: -50 to +50 (1 step =
0.1mm)
• Tri-Fold-out Pos. Adj.: -50 to +50 (1 step =
0.1mm)
• Double Parallel Pos. Adj.: -50 to +50 (1 step =
0.1mm)
• Z-Fold Position Adj.: -50 to +50 (1 step =
0.1mm)
• Gate Fold Position Adj.: -50 to +50 (1 step =
0.1mm)
05 Stacker Adjustment
• Paper Width Adjustment: -20 to +20 (1 step =
0.1mm)
• Paper Length Adjustment: -20 to +20 (1 step =
0.1mm)
06 Saddle Stitcher Adj.
Adjust the settings related to the Saddle Stitcher
SD-501.
• Staple Center Adj.: -20 to +20 (1 step =
0.1mm)
• Staple Paper Width Adj.: -20 to +20 (1 step =
0.1mm)
• Staple Pitch Adjustment: -20 to +20 (1 step =
0.1mm)
• Half Fold Position Adj.: -50 to +50 (1 step =
0.1mm)
• Tri-Fold Position Adj.: -50 to +50 (1 step =
0.1mm)
• Fold Paper Width Adj.: -50 to +50 (1 step =
0.1mm)
• Trimming Adjustment:-400 to +400 (1 step =
0.1mm)
• Trimmer Receiver Adj.: Trimmer Count, Move
Pitch, Execute Compulsive Movement
07 RU Adjustment
Adjust the settings related to the Relay Unit RU-
503/ RU-504.
Curl Reform Direction: Off/ Upper/ Lower
15
Default
Off
15-23