9
9.9
Using Finisher FS-607 manually
The Finisher FS-607 with Paper inserter PI-502 installed can be operated
manually, using the operation panel provided on the paper inserter.
Place a set of paper into the lower tray. Upper tray cannot be used.
Available finishing modes according to the optional configuration are
described below.
- Finisher FS-607 + Paper inserter PI-502
–
Staple (1 staple / 2 staples)
–
Fold & Staple
–
Multi Tri-Fold
- Finisher FS-607 + Paper inserter PI-502 + Punch kit PK-512/513
–
Staple (1 staple / 2 staples)
–
Fold & Staple
–
Multi Tri-Fold
–
Punch
Fold&Staple
1 oblique staple
9-54
2 parallel staples
Multi Tri-Fold
bizhub PRO C6500 / bizhub PRO C6500e
Output applications
Start/Stop button
Punch