Multi Folder (Fold) Adj. \ 05 Z-Fold Position Adj - Konica Minolta BIZHUB PRO C6500E User Manual

Machine adjustment

14.5.7 03 Multi Folder (Fold) Adj. \ 05 Z-Fold Position Adj.

Perform this adjustment for the folding positions in Z-fold mode processed
by the folding unit FD-501.
Reminder
When adjusting both Single Fold and Double Fold, be sure to start with
the Single Fold adjustment.
The baseline of Single Fold is calculated from the edge of the sheet, while
that of Double Fold is calculated from the position of the first fold line,
therefore a distance (b) in step 5 will be altered by changing the position
of either Single Fold or Double Fold.
To specify Z-Fold Position Adj.
1
Touch [Adjustment] on the Machine Status screen.
The Adjustment Menu screen will be displayed.
2
Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then
[05 Z-Fold Position Adj.].
The Z-Fold Position Adjustment screen will be displayed.
bizhub PRO C6500 / bizhub PRO C6500e
14
14-49