Sorting/Stapling Copies (Finisher Fs-503) - Konica Minolta BIZHUB PRO C6500E User Manual

Output applications
9.3

Sorting/stapling copies (Finisher FS-503)

The finisher FS-503 has a primary (main) tray and a secondary (sub) tray,
each of which has the following output modes.
Output to the primary (main) tray
- Non-sort
Non-sort mode simply means that the offset-stacker finisher modes are
not selected. Copies will be stacked upon exit without being offset by
sorted sets.
- Collate
Collate mode outputs multiple copies of the original set, having each
sorted set offset by 30 mm upon exit.
- Uncollate
Uncollate mode groups together multiple copies of each original and
offsets the sets by 30 mm upon exit.
- Staple
Staple mode offsets and staples each sorted set.
Combined with the output modes above except staple mode, you can also
choose to output face up or face down, and output front to back or back to
front.
Example: Make 3 copied sets from 4 original sheets
Non-sort
bizhub PRO C6500 / bizhub PRO C6500e
Staple
2 staples
Offset by 30mm
1 oblique
staple
Collated Uncollated
Offset by 30mm
9
9-9