Interrupting Job In Progress: Interrupt Mode - Konica Minolta BIZHUB PRO C6500E User Manual

Advanced information
10.3

Interrupting job in progress: Interrupt mode

Use the Interrupt mode to interrupt copying in progress to perform a simple
job. Pressing [Interrupt] on the control panel stops the machine operation
temporarily at the timing available for interrupt copying. When interrupt
copying is completed, the settings for the previous job restore automatically
and the Copy screen displays.
0 The Interrupt mode cannot be selected with the following copier
conditions:
Machine is not operating printing or scanning job.
Program Overlay is in use.
The Call for Service message displays or a paper misfeed occurs.
Already using Interrupt mode.
0 Reserve job cannot be operated in Interrupt mode.
0 Auto Low Power or Auto Shut-off will not function during Interrupt mode.
1
Press [Interrupt] on the control panel.
The [Interrupt] LED starts flashing,
then keeps lighted when machine is
ready for Interrupt mode.
The Copy screen for interrupt
copying will be displayed.
2
Set copy conditions, as desired.
– All copy conditions except Reserve mode can be specified.
bizhub PRO C6500 / bizhub PRO C6500e
10
10-9