Setting Reserve Job - Konica Minolta BIZHUB PRO C6500E User Manual

Basic job settings
6.7

Setting reserve job

The Reserve function allows you to set up a new job while a current job is in
process. When the current job is finished, the reserve job starts printing
immediately.
Service can set the machine to disable this function. Contact your service
representative, if desired.
0 Job settings: max. 100
0 The reserve job setting will be available after the copier starts to scan the
current job, and also available anytime while printing the current job.
1
Display the Copy screen with the message "Ready to set reserve job"
displayed in the message area.
– When scanning job is started:
The following popup menu will be displayed.
Touch [Yes] to set reserve job. The Copy screen for setting reserve
job will be displayed.
Touching [No] will return to the Machine Status screen. In this case,
touching [COPY] tab will display the Copy screen and allows you to
make the reserve job setting.
If the machine is initially set to display the Copy screen after
scanning job is started, the above popup menu will provide only the
[Close] key. Touching [Close] will also display the Copy screen to
make the reserve job setting.
bizhub PRO C6500 / bizhub PRO C6500e
6
6-63