Table of Contents
Advertisement
8
7
Touch [OK] on the Application screen.
The Copy screen will be restored, with highlighted [Insert Image] key
displayed under the [Application] key.
Use this key to jump to the subsequent screen to make any setting
change.
The [Separate Scan] key on the Copy screen also appears highlighted
to show that the Separate Scan mode is automatically selected.
8
Select additional copy conditions, as desired.
9
Press [Start] on the control panel.
–
The machine starts scanning the original loaded in the ADF.
10
Place the original of image insertion on the original glass.
–
Open the ADF, position the insertion original facedown on the
original glass, then gently close the ADF.
11
Press [Start].
–
When scanning multiple originals, be sure to start with the first page
and repeat steps 9 and 10 for all the originals in page order.
12
Touch [Separate Scan] to exit the Separate Scan mode.
13
Enter the desired print quantity from the control panel keypad, then
press [Start].
The machine will start printing when ready for output.
8-28
bizhub PRO C6500 / bizhub PRO C6500e
Application functions
Advertisement
Table of Contents
Troubleshooting
