Loading/Sorting A Volume Of Copies (Large Capacity Stacker Ls-501) - Konica Minolta BIZHUB PRO C6500E User Manual

9
9.10 Loading/sorting a volume of copies (Large capacity
stacker LS-501)
The large capacity Stacker LS-501 has a stacker (on the carriage) and a
secondary (sub) tray, each of which provides the following output modes.
Output to the stacker
Non-sort:
Non-sort mode simply means that the offset-stacker finisher modes are not
selected. Copies will be stacked upon exit without being offset by sorted
sets.
Collate:
Collate mode outputs multiple copies of the original set, having each sorted
set offset by 20 mm upon exit.
Uncollate:
Uncollate mode groups together multiple copies of each original and offsets
the sets upon exit.
Combined with the output modes above, you can also choose to output face
up or face down, and output front to back or back to front.
Output to the secondary (sub) tray
Collate:
Collate mode outputs multiple copies of the original set. No offset output is
available.
Uncollate:
Uncollate mode groups together multiple copies of each original. No offset
output is available.
Combined with the output modes above, you can also choose to output face
up or face down, and output front to back or back to front.
!
Detail
For detailed specifications, see "Paper tray/ exit tray capacity" on
page 3-6 and "Large capacity stacker LS-501" on page 25-6.
9-56 bizhub PRO C6500 / bizhub PRO C6500e
Output applications