Using Paper Not Specified To Any Tray: Paper Setting - Konica Minolta BIZHUB PRO C6500E User Manual

6
6.6.3

Using paper not specified to any tray: Paper Setting

Each paper tray has been preset with paper size and other specifications.
If you want to use another paper than any loaded in the trays, follow the
procedure below to temporarily change the setting of the tray to be used.
When starting a job after a setting change has been made in paper type (e.g.
from Normal to Coated-GL), it may take a certain period of time before
copying operation becomes available due to the fixing temperature
adjustment.
1
On the Copy screen, check the tray setting for each tray.
– Each key displays paper size, weight, type/name, and paper
amount remaining in the tray.
The paper name will be displayed only when the same paper size
as that in registered specifications is loaded.
2
Load copy paper into the tray with the setting change made.
– The changed setting will not be cleared when copying job is
completed using that tray.
3
Touch [Paper Setting].
The Paper Setting screen will be displayed.
6-48 bizhub PRO C6500 / bizhub PRO C6500e
Basic job settings