Refilling Trays 1 And 2 - Konica Minolta Di551 Advanced Information

2

Refilling Trays 1 and 2

Add paper to paper trays 1 and 2.
These trays allow various paper sizes and alignments.
1 Pull the drawer out as far as it will
go.
2 Lift the paper feed roller out of the
way.
3 only when changing the paper
size
Remove any remaining paper from
the paper tray. Slide the edge
guides completely out. Set the back
paper guide to the desired size.
4
Fan the new paper. Align the paper
edges straight.
5 Load the new paper so that the side
that undulates upward is face up.
❍ Tray 1
up to 500 sheets (80 g/m²)
❍
Tray 2
up to 500 sheets (80 g/m²)
6 Make sure not to exceed the
maximum paper filling level. The
paper stack must not be higher than
the red mark of the indicator.
2-38
Getting to Know Your System
2
1
Di551/Di650