Table of Contents
Advertisement
Settings in Key Operator Mode
7.17
(16) Side 2 Lens Adjustment
Adjust the lens settings for the second side to compensate for paper
turning due to the heat in the copier. This ensures that the back sides of
2-sided copies are positioned accurately.
1
Call up key operator mode.
The key operator mode menu is displayed.
2
Press the down arrow key on the lower edge of the touch screen.
The second page of the key operator mode menu is displayed.
3
In the key operator mode menu press the [16] Side 2 lens adjustment
key.
The screen for adjusting the lens for the second side appears.
4
Select the paper tray that you want to adjust the lens for.
5
Select the desired value using the arrow keys.
6
Repeat steps 4 and 5 for any other trays.
7
Confirm your settings by pressing [OK].
8
Press the [RETURN] key.
The key operator mode menu is displayed again.
Di551/Di650
7
7-59
Advertisement
Table of Contents
