Switching On The System (Daily) - Konica Minolta Di551 Advanced Information

2

Switching On the System (daily)

1 Ensure that the main switch is set to
position I (ON).
2 Press the power switch to switch on
the system.
The warm-up phase (about 5 and a
half minutes for the Di551,
about 6 minutes for the Di650)
begins. A copy job can be set up
now. Touch the touch screen briefly.
The basic options are then
displayed. The status display shows
the following message:
Position original in the EDH face up.
The copy job can be set up.
Changing the default system settings!
The default system setting that is active after switching on or resetting
the system can be changed. For more information, see page 7-1.
2-30
Getting to Know Your System
Di551/Di650