Table of Contents
Advertisement
Getting to Know Your System
2.2
Options (Accessories)
Finisher FN-6
The finishers provide regulated output and sorting of copies.
The finisher provides these features:
G
Sort
G
Staple
G
Group
G
Folding
G
Folding & Stapling (for creating booklets).
G
Three folding
CAUTION
Device damage by incorrect assessment of space requirements
The offset trays of a finisher move downward during the output cycle.
Objects below the offset trays may seriously damage them.
➜
Do not place any objects below the offset trays of the finisher.
CAUTION
Danger of injury!
The Finisher FN-6 booklet output is fitted with a folding unit.
➜
Do not reach into the booklet output of the Finisher when you are
removing folded or stapled booklets.
Do not exceed the capacity of the offset trays!
Do not exceed the capacity of the finisher offset trays, otherwise a
paper misfeed may occur. You should empty the offset trays during a
large copy job to avoid exceeding the capacity.
Di551/Di650
2
2-5
Advertisement
Table of Contents
