Initial Steps . . .
3.12
Using the Bypass Tray
You can load up to 100 sheets of 60 to 90 g/m² paper or 1 sheet of 50 g/m²
or 1 sheet of 170 g/m² into the bypass tray.
Note the following important information!
• Paper sizes:
• Original weights:
• Paper capacities:
Load the Paper on to the Bypass Tray
1
Open the bypass tray on the right
side of the system.
2
If using large sized paper, pull out
the extender of the bypass tray.
3
Place the paper flush up against the
feed chamber of the bypass tray.
❍
Special papers, OHP
transparencies:
max. 1 sheet
❍
Other:
max. 100 sheets (80 g/m²)
4
Slide the edge guides to fit the size of the inserted paper.
Di551/Di650
A3, B4, F4, A4R, A4, B5R, B5, A5R, A5, B6R, A6R,
11"× 17", 8.5"× 11"
Max.: 314 mm × 459 mm
Min.: 100 mm × 148 mm
50 to 170 g/m²
Plain paper
Special paper, OHP
transparencies
max. 100 sheets (80g/m²)
max. 1 sheet.
3-43
3