Table of Contents
Advertisement
Applications
4
Set the selected function as desired.
Stamp
Set Numbering
?
What options are there?
➜
Select the type of stamp (page numbering, set numbering, date/
time).
➜
Select the position of the imprint on the paper.
➜
Press the [FINE ADJ. OF POSITION] key to define the position of
the imprint.
➜
Press the [CHARACTER SIZE] key to select a font size for the
imprint.
➜
Press the [CHARACTER SIZE/TYPE] key to select a font for the
imprint.
➜
Press the [PRINTED PAGE] key to specify which pages are to
receive the imprint.
➜
Press the [STARTING NO.] key to specify the page on which the
imprint should begin. When the "Chapter" function is enabled, a
chapter number can also be set. For more information, see
page 5-53.
5
Confirm your settings by pressing [OK].
6
Change any other necessary system settings.
Use the 10-Key Pad to set the number of copies.
7
Load the originals.
8
9
Press the [START] key on the control panel to start the copy job.
Di551/Di650
Page Numbering
Date/Time
5
5-55
Advertisement
Table of Contents
