Table of Contents
Advertisement
5
4
only as required
Place the paper for the cover sheets in the indicated paper tray.
or
Press the [CHANGE COVERS TRAY] key, several times if necessary,
to select a different paper tray.
or
Press the [CHANGE OUTPUT MODE] key to select a different page
sequence. Normally, the order "1 to n" is used for the Booklet function.
5
Confirm your input by pressing [OK].
The basic options are displayed again.
6
Select the paper tray containing the paper to be used. Set the copy
mode to 1-2 or 2-2. Make any other required system settings.
7
Use the 10-Key Pad to set the number of booklets.
8
Load the originals into the EDH.
9
Press the [START] key on the control panel to start the scanning cycle.
5-16
Applications
Di551/Di650
Advertisement
Table of Contents
