3
Start Cycle
Start a copy or scan cycle.
A cycle can be started only when the basic functions are displayed on the
touch screen.
➜
Press the [START] key on the
control panel.
The cycle starts.
Stop Cycle
Stop a copy cycle, e.g. to prevent further output of faulty copies.
➜
Press the [STOP] key on the control
panel.
The copy cycle stops. A
confirmation dialog appears. Select
whether you want to interrupt the
cycle or continue it.
Reset System Settings
Reset the system to the system default setting.
➜
Press the [RESET] key on the
control panel.
The system is reset to the system
default setting.
Automatic Reset of the System
In key operator mode, you can specify a time after which the system
is automatically reset to its initial settings. For more information, see
page 7-49.
3-2
Initial Steps . . .
Di551/Di650