Table of Contents
Advertisement
4
5
Press the [START] key on the control panel to start scanning the
original.
The data is scanned into memory.
6
Check that enough memory is still
available.
?
Is there too little available
memory left?
➜
Do not scan any more originals.
7
Repeat steps 4, 5 and 6 to scan
other originals.
?
How can I delete the data that
has been scanned into memory?
➜
Press the [STOP] key on the control panel. A dialog field is
displayed on the touch screen. Press the [EXIT] key to confirm the
deletion of the data.
8
Press the [STORE] key to complete the scanning procedure.
9
Press the [START] key on the control panel to start the copy job.
The copies are output. When the output cycle finishes, the scanned
data in the memory is deleted automatically.
?
Do you want to cancel the copy cycle?
➜
Press the [STOP] key on the control panel.
4-66
Basic Functions
Di551/Di650
Advertisement
Table of Contents
