Selecting Paper Trays; How To Select A Paper Tray - Konica Minolta 7415 Service Handbook

3-6

3. Selecting Paper Trays

How to select a paper tray

Paper trays are selected using the Paper Select Key.
You can select from the Paper Drawer, the Paper Feed Unit and the Manual Bypass Tray depending on the
configuration of your copy application.
The paper tray options can be selected as follows by pressing the Paper Select Key.
Paper Tray
*no indicator
The "Manual Bypass" indicator will become lit when the Manual Bypass Tray is selected. The "Paper
Feed Unit" indicator will become lit when the Paper Feed Unit is selected. No indicator will become lit
when the Paper Tray is selected.
Paper Tray
C4007O008DA
NOTE
Be sure to change the "U7: Paper Size Select" User's Choice setting whenever a different size of paper
is loaded into the Paper Tray. p. 4-6.
Useful Tips
• The Paper Tray is prioritized when the Initial Mode is enabled. The Paper Feed Unit can be prioritized
in the Initial Mode through the User's Choice Mode. p. 4-8
• Should the paper supply run out while copies are being output from the Paper Tray, copying can
continue through the Paper Feed Unit if the same size paper has been loaded into the Paper Feed Unit.
This feature is called Auto Tray Switching.
Manual Bypass Tray
Manual Bypass Tray
C4007O009DA
C/
C4007O007DA
Paper Feed Unit
C4007O143CA
Paper Feed Unit
C4007O010DA