Minolta Di 152f User Manual page 77

3
Note:
G Load only copy paper of the specified type, size and amount,
otherwise paper misfeeds or other problems may occur.
G If paper with a size in inches (Letter, Legal, etc.) is loaded into a paper
tray, select the appropriate setting for the "INCH/METRIC" function in
the Utility mode. (p. 9-13)
G If paper with a non-standard size is loaded into the 1st Tray, select the
appropriate setting using the "TRAY1 PAPER" function in the Utility
mode. (p. 9-14)
G If paper with a non-standard size is loaded into the Manual Bypass
Tray or Multiple Bypass Tray, select paper size setting "CUSTOM"
before making copies, and then enter the corresponding paper size.
(p. 4-19)
G If cards, OHP transparencies, or postcards are loaded into the 1st
Tray, select the appropriate setting using the "TRAY1 PAPER"
function in the Utility mode. (p. 9-14)
G If cards, OHP transparencies, or postcards are loaded into the Manual
Bypass Tray or Multiple Bypass Tray, select the appropriate paper
type before making copies. (p. 4-15 or p. 4-17)
G If you do not want automatic paper size/paper source selection to be
activated when recycled paper is loaded into a paper tray, select the
appropriate setting using the "AUTO SELECT" function in the Utility
mode. (p. 9-16)
G If FLS paper with a size other than the default FLS size (210 mm
330 mm) is loaded, the setting must be changed. For details, contact
your service representative.
G Do not load paper of different sizes into the same paper tray.
3-40
Before Making Copies or Faxing
Di152f/Di183f