To Change/Delete A Programmed Timer Transmission - Minolta Di 152f User Manual

Utility Mode – Fax Functions

To change/delete a programmed timer transmission

1
Select the "FAX REGISTRATION"
menu.
❍
Refer to "To select the "FAX
REGISTRATION" menu" on
page 10-2.
2
Press the [4] key from the 10-Key
Pad to select "PROGRAM DIAL".
3
Press the one-touch dial key ([24]
through [27]) programmed with the
timer transmission that you wish to
change or delete.
4
Press the [No] key.
5
Using the
either "EDIT" or "DELETE", and
then press the [Yes] key.
❍ If "EDIT" was selected, the
programmed transmission time
is displayed. (Continue with step 6.)
❍ If "DELETE" was selected, the program dialing settings are deleted
and the "FAX REGISTRATION" menu appears again.
6
To change the transmission time,
press the [No] key, and then use the
10-Key Pad to enter the correct
time.
If you do not wish to change the
transmission time, press the [Yes]
key.
The recipient is displayed.
Di152f/Di183f
and keys, select
10
10-19