To Make Copies Using The "X/Y Zoom" Function - Minolta Di 152f User Manual

Basic Copy Operations

To make copies using the "X/Y Zoom" function

1
Load the document to be copied.
❍ Refer to "Loading the Document" on page 4-1.
2
Press the [X/Y Zoom] key until the
"X/Y Zoom" indicator lights up.
3
Using the
the desired zoom ratio for the length
(X), and then press the [Yes] key.
❍ The zoom ratio increases and
decreases in 0.01 increments.
❍ Press the [No] key to reset the
zoom ratio to " 1.00".
❍ The zoom ratio can be changed
by using the [Zoom] key. Each
press of the [Zoom] key
changes the zoom ratio as
shown below.
0.50
1.00
4
Using the
the desired zoom ratio for the width
(Y), and then press the [Yes] key.
❍ The zoom ratio increases and
decreases in 0.01 increments.
❍ Press the [No] key to reset the
zoom ratio to " 1.00".
❍ The zoom ratio can be changed
by using the [Zoom] key. The
zoom ratios that can be selected are shown in the step above.
Di152f/Di183f
and keys, select
0.70 0.81
0.50 . . .
and keys, select
Width (Y)
Length
(X)
4
4-23