To Select The "Copy Setting 2" Menu - Minolta Di 152f User Manual

Utility Mode – Copy Functions
4
Using the 10-Key Pad, enter the
width of the area to be erased, and
then press the [Yes] key.
❍ The width of the area to be
erased can be set between
5 mm and 20 mm.
❍ If you wish to correct the setting, press the [No] key, and then enter
the new number.
The "COPY SETTING 1" menu appears again.

To select the "COPY SETTING 2" menu

1
Press the [Utility] key.
2
Press the
"COPY SETTING 2".
3
From the 10-Key Pad, press the key ([1] through [5]) for the "COPY
SETTING 2" function that you wish to set.
❍ The "COPY SETTING 2" functions are as follows:
1 MIXED ORIGINAL
2 COPY PRIORITY
3 OUTPUT PRIORITY
4 4IN1 COPY ORDER
5 CRISSCROSS MODE
Tip
If, at any time, you wish to quit setting a "COPY SETTING 2" function,
press the [No] key. When the message "STOP SETTING?" appears,
press the [Yes] key to quit.
Di152f/Di183f
key 5 times to select
9
9-37