Turning On The Machine; Default Settings - Minolta Di 152f User Manual

Before Making Copies or Faxing

Turning On the Machine

After the machine is turned on, the indicator on the [Start] key lights up in
orange and "PLEASE WAIT!" appears in the display while the machine
warms up.
At this time, a document can be loaded into the Automatic Document
Feeder and the [Start] key pressed to queue the job. (p. 3-25)
Even though the [Start] key is pressed, the copy operation does not begin
until the machine has finished warming up (after about 30 seconds at a
room temperature of 23°C (73.4°F)).

Default Settings

The settings that are automatically selected when the machine is turned
off or the [Panel Reset] key is pressed are called the "default settings".
These settings serve as a reference for all functions.
Copy mode
G Number of copies: 1
G Copy density: AUTO
G Zoom ratio: Full size ( 1.00)
G Paper source: AUTO (with the Automatic Document Feeder installed)
G Finishing function: Non-sort
Fax mode
G Resolution: Standard
G Contrast: Medium
G
Transmission mode: Memory transmission
G Reception mode: Automatic reception
G Paper size/source priority: Priority to the paper size
G Transmission source: Within document
Tip
The default settings can be customized using the functions in the
Utility mode ("9 Utility Mode – Copy Functions" and "10 Utility Mode –
Fax Functions").
Di152f/Di183f
3
3-29